An epoxy coating may achieve both elegance and durability in more ways than one. Yet, using epoxy carelessly could lead to more harm than good. So to give you some insight, here are the most critical things to be aware of when implementing epoxy flooring Mississauga.

What Would Experts Do When Using Epoxy?

You can always tell the difference when an expert works on a project. But there is more than having the skills and license to do things. These four things we listed here set the pros apart from ordinary home improvement warriors. Do these four safety processes to be like them.

Workers applying epoxy in an industrial space

Four Important Safety Procedures You Must Follow:

Protective Gear

While applying epoxy to floors, using protective gear like gloves, eye protection, and a respirator/gas mask can help protect your skin and eyes from any potential injury.

Health issues are brought on by high exposure to toxic chemicals. Your immune system and general health may impact your ability to tolerate a chemical.

The Entropy Resins product line’s epoxy resins and hardeners are created with the finest physical qualities while posing the fewest environmental and human health risks. This keeps the number of dangerous substances in our products at a level where you can easily avoid overexposure using sensible work practices.

Prepare the Surface

When applying epoxy to floors, the surface must be carefully prepared because any flaws might cause the substance to cover unevenly and bubble. The best outcomes will emerge from adequately preparing the surface for epoxy, especially in terms of the epoxy’s overall durability and longevity.

Mix the Epoxy Properly

To get the best results, be sure to mix the epoxy following the manufacturer’s recommendations correctly. A resin and a hardener make up an epoxy resin.

When the resin and hardener are combined, a chemical process occurs that turns the liquid into a solid. Measuring precisely and thoroughly mixing your epoxy resin is crucial to guarantee appropriate curing. When the resin mixture is improperly blended, unmixed material sticks to the sides and develops soft patches.

Mixing epoxy resin in a bucket

Apply Evenly

Apply the substance uniformly to the floor using a roller or brush to ensure the proper setting and prevent the formation of any air bubbles. The “roll on and tip off” technique is a beautiful way to do this.

You can use a foam roller to apply a thin epoxy coating and then “tip off” by dragging another roller divided into parts over the surface to leave it level and bubble-free.

Curing Hazard

Aside from the tips above, certain situations could affect the job that you may also need to be fully aware of. An exothermic chemical process that produces heat causes the epoxy to cure.

The epoxy may heat up to the point where it melts plastic, burns your skin, or ignites surrounding flammable items if left to cure in a closed area, such as a mixing pot.

Epoxy masses produce tremendous heat as they are bigger or thicker. Epoxy combined with a multitude of 100 grams can reach 400.

Pour the combined resin and hardener into a roller pan or another wide, shallow container to prevent heat accumulation.

These epoxy mixtures should be applied in numerous thin layers rather than one thick one to fill big voids. Heat accumulation and uncontrolled curing are unusual in bonding and coating applications because spreading the epoxy mixture into thinner layers disperses heat.

As the combined resin and hardener thermally degrade, hazardous gasses such as carbon monoxide, nitrogen oxides, ammonia, and perhaps certain aldehydes are produced.

When heated excessively, such as when using a flame to remove a cast or inserted item, cured epoxy can release these fumes. Work in an area with good ventilation, and only use a flame as a last option.

Leave the container somewhere where you can keep an eye on it while the remaining mixed epoxy cures. Vapours may be spread out and directed away from humans using a fan.

Respirators that cleanse the air might not be sufficient for these vapours and gas.

Wrapping Up

You are responsible for your health and safety. You may safeguard your health and safety when using Entropy Resins epoxy products by staying knowledgeable about the goods you use, adhering to epoxy resin safety guidelines, and practicing shop safety. Remember that hiring the right people as your local team of epoxy flooring Mississauga is always an option when you have second thoughts about doing things yourself.

If you are unaware of how to install epoxy on your flooring, leave the epoxy work to professionals or experienced resurfacing contractors.

Scroll to Top