Knowing the basics of a concrete repair Oakville would save you from worrying about the tiny cracks on your porch steps. Concrete floors are durable outdoor materials that do not form that much damage in reality. It is best to be always prepared in cases that you need a quick fix to the most crucial spaces in your properties where safety is number one.
The question now is where to start?
Where to Start Your Concrete Repair for Home?
To start your home-based concrete floor repair and DIY maintenance, you need to check if you got the following:
- Tools appropriate for repairing concrete floors
- The right skills for slab preparation
- Know the difference between broad and narrow cracks
- Time and essential skills for mixing concrete
Now let’s talk about each of them in this quick and easy to follow the discussion below:
Tools You Need
First, let’s enumaret the tools you need. You can tackle any flooring situation if you can get the basic concrete floor repair tools. Once you realize that you do not have the right items, you must decide if buying a device would be more cost-efficient than calling a professional flooring contractor.
Check out below the items that you need to make sure you have:
- Margin trowel
- Flat trowel
- The concrete adhesive used as the binding agent
- Angled grinder with crack chasing blade
- Turbo cutter
- Concrete filler or patching compound
- Flat bottom bucket
You could tackle large or narrow concrete cracks if you got these tools. The easiest way is to visit your local concrete flooring suppliers and acquire a concrete repair kit, which is the best way for you if you are a beginner in concrete repair.
So, next is to figure out how to use the tools and how to go about the entire process. But first, consider the following.
Slab prep tools
Here are the tools you need for preparing the concrete slab:
- Topping compound or filler
Crack repair tools
Crack repair tools would include:
- Crack filler
- Bucket for mixing the filling or patching compound
- Trowel for spreading the contrite filler compound
- Repair patch kit
For leveling and grinding tools
- Concrete saw cutter blades
- Angled grinder
- Power washer
Let’s now go to the essential process of a beginner’s concrete repair project.
Prep Your Concrete
The first process and the most important one is concrete preparation. Sometimes, levelling and grinding the surface is necessary if the surface becomes uneven due to a crack caused by moving ground.
First, chisel out the debris on the crack, whether it’s a wide or narrow crack.
For Wide Cracks
Wide cracks are apparent cracks on the surface often measure an inch and wonder. This would also often happen among high traffic and high wear and tear areas such as garages and industrial floors.
But for a quick garage floor fix, you can fill large cracks using a cracks filler. Be sure to prep the surface first with the tools above.
For Narrow Cracks
As a beginner, the last thing you need to know is to tell a narrow crack. Often this would appear thin and hidden on the surface until you notice it crawls father front of where the cracks started. You can patch the surface. However, a wider gap would appear after you prep it with chisels. If it still reveals narrow cracks, you can surely fix them yourself. The concrete repair patch kit would be your best friend when doing this.